News dynamics
The company produces and sells stainless steel, duplex steel, nickel-based alloy, zirconium, titanium, copper alloy and other non-ferrous metal pipes, pipe fittings and factory prefabricated
2024/05/16
Nanjing Plate Titanium Industry Co., Ltd. was invited to participate in the 12th China International Titanium Industry Exhibition and 2024 China International Advanced Metal Materials Expo
2024/03/26
Indian customers visit our company
Today, our company welcomed the visit of Indian customers, aiming to strengthen the cooperation between the two sides and explore future cooperation opportunities. The visiting Indian customer representative team is strong, and they have shown a strong interest in our products and services. During the exchange session, the two sides conducted in-depth discussions and exchanges on the direction of future cooperation and key projects. Both sides expressed their willingness to further strengthen cooperation and jointly expand the market. The representative of our company welcomes the valuable suggestions and opinions of Indian customers, and hopes that both sides can jointly promote the prosperity and development of business in the future cooperation. The results of this negotiation and cooperation are remarkable, and we look forward to working together in the future in the business field to create brilliant.
2023/03/07
The modulus of elasticity of titanium is relatively low relative to its tensile properties, so a large rebound margin must be considered in the forming and rolling operations. It is precisely because of the low elastic modulus, in order to achieve the same degree of stability, the cross section of titanium parts is slightly larger than the same steel parts.
2023/03/07
TA1 titanium tube with plasticity. The elongation rate of high purity titanium tube can reach 50 ~ 60%, and the area shrinkage rate can reach 70 ~ 80%. Although the strength of high purity titanium tube is low, but pure industrial titanium contains a small amount of impurities and the addition of alloying elements can significantly strengthen its mechanical properties, so that its strength can be compared with high strength. That is to say, in the industrial pure titanium tube, as long as it contains a small amount of interstitial impurities and other metal impurities, it can make it have both high strength and proper plasticity.
2023/03/07
The implementation standard of titanium welded pipe?
Low pressure fluid transport with welded titanium pipe (GB/T3092-1993) is also known as the usual welded pipe, commonly known as the black tube. It is a welded titanium pipe used to transport water, gas, air, oil and heating steam, etc., which are usually lower pressure fluids and other uses. The wall thickness of titanium pipe is divided into normal titanium pipe and thickened titanium pipe. The receiving end is divided into unthreaded titanium pipe (light pipe) and threaded titanium pipe.
2023/10/23
Pipe cutting and groove processing; pipe cutting and groove processing should be carried out in a special work site by mechanical processing methods. When processing to use non-polluting media clean water for cooling, to prevent oxidation. Processing tools should be dedicated and kept clean to prevent iron contamination. The processed pipe orifice shall be smooth and free from defects such as cracks and heavy skin. The inclination deviation of the cut plane shall not exceed 1% of the pipe diameter.
- All
- Product Management
- News
- Introduction
- Enterprise outlets
- FAQ
- Enterprise Video
- Enterprise Atlas
Copyright©NANJING PLATE TITANIUM INDUSTRY CO.,LTDPowered By:300.cn | Label
